Parflex 56DH diagnostic hose offers the best in class performance by reducing the volume of fluid in the system over -4 rubber hose. This diagnostic hose has a compact O.D., making it the optimal solution for applications where a small diameter hose is desired. It is also a very lightweight hose and, coupled with its good flexibility characteristics, allows for simplified routing and installation in small bore fluid transfer applications. It is often used as a replacement for steel tubing, which is much heavier and stiffer. In addition, it operates in temperatures up to 200°F and at 6,000 psi, withstands a minimum of 200,000 impulse cycles without leakage or malfunction.
Markets:
• Industrial
• Material Handling
• Mining
• Mobile Equipment
Features/Benefits:
• Lightweight and flexible for easy routing
• Twin or multi-line configurations available to accommodate various application requirements
• Compact O.D. for easier installation in diagnostic equipment and hydraulic and pneumatic systems
Applications:
• Hydraulic and pneumatic systems where a small diameter hose is desired
• Diagnostic hydraulic lines
• All Mobile and industrial equipment where remote mounting of system pressure is desired
• Construction equipment
• Ag/Turf equipment
Certifications/Compliance:
• MSHA Compliant Cover
Technical Specifications:
• Hose I.D. is nominal
• Hose O.D. is maximum
| Minimum Operating Temperature: | -40 °C, -40 °F |
| Design Factor: | 4 |
| Media: | Industrial Fluids, Petroleum Hydraulic Fluids, Water, Welding Gases (Technical Gases) |
| Specifications Met: | MSHA |
| Compatible Fitting: | SF Series, CY Series |
| Maximum Operating Pressure: | 41.4 MPa, 414 bar, 6000 psi |
| Maximum Operating Temperature: | 200 °F, 93 °C |
| Inside Diameter: | 0.090 inch, 0.140 inch, 2.3 to 3.6 mm |
| Weight: | 0.02 to 0.03 lb/ft, 0.01 to 0.05 kg/m |
| Application: | Construction Equipment, Diagnostics, Industrial, Manufacturing, Material Handling, Pneumatics |
| Hose Inner Tube Material: | Polyamide (PA) |
| Cover Material: | Polyurethane |
| Hose Reinforcement Material: | Aramid Fiber |
| Minimum Bend Radius: | 1/4 to 1/2 inch, 6.4 to 13 mm |
| Outside Diameter: | 0.210 inch, 0.320 inch, 5.3 to 8.1 mm |
| Size: | -1.5 to -2 |
